It seems that many contributions as of late have been with regards to equipment. So I thought I’d share a mini adventure. But ironically, this outing was all because of the equipment. Let me start with a little back story.
2015 Toyota Tacoma Build – Pelfreybilt Bumper
I recently installed my new Pelfreybilt High Clearance Rear Bumper for my 2015 Toyota Tacoma. This was a rather straight forward installation, but you definitely need a helping hand to lift it into place. Continue reading, and I’ll show what it took for me to install.
2015 Toyota Tacoma Build – Hood Lighting
I never understood why lighting in the engine compartment of a vehicle wasn’t a standard option. After all, with LED lighting so inexpensive and with low power requirements, it just makes sense to have it standard on all vehicles. But alas, that’s not the case. So with my 2015 Toyota Tacoma, I recently added LED strip lighting under the hood, and I’m going to show you how I installed it.
Using Google Earth with MotionX GPS HD
Google Earth is a wonderful application that allows you to explore the world around you from the comfort of your home. You can pre-plan an overland adventure to create tracks and waypoints that you can then follow once out in the wild. However, it’s not a GPS navigation system, so you need another device or application. That’s where MotionX GPS HD for the iPad comes in. But how do you get these tracks and waypoints from Google Earth into MotionX? Well, today I’m going to show you how to export a track from Google Earth and bring it into MotionX GPS HD.
DIY Bussmann RTMR Fuse Block, Part 6 – Installation
This is Part 6 in an on-going series of tutorials that will teach you how to build a Bussmann RTMR fuse/relay block for your vehicle. Previous articles discussed parts, tools, and assembly for the enclosure. If you’ve been following along, then you should have a completed Bussmann RTMR fuse/relay block that is ready for installation.