Thanks to some kid who smashed my tail light, I replaced them with Depo black tail lights. I never had any plans of changing these, but I kinda like them.
Before:
After:
Thanks to some kid who smashed my tail light, I replaced them with Depo black tail lights. I never had any plans of changing these, but I kinda like them.
Before:
After:
If you’re going to go off-roading, then you need rock sliders. You can’t go wrong with Demello Offroad.
When I ordered my Icon suspension, I requested 700lb springs. However, they were delivered with 650lb springs. Installed them today.
Today I did the rear differential breather mod. I used 3/8″ fuel line, and ran it up to the gas filler. However, I didn’t cut through the plastic to have it exit at the filler cap. Instead, the line is zip-tied to the filler hose and left up in the cavity between the fender and bed liner.
Today I’m going to review my experience creating new foam inserts for two Halliburton Zero cases that I use for a Fuji GX-617 camera. I used a company called My Case Builder, and the entire process took about two months, which is crazy when you think about it. However, when you break down all steps involved, it’s somewhat justifiable, or at least understandable. My hope is to inform others who are thinking about doing something similar, and perhaps help you in the process.